5 Common Slitting Mistakes & How to Avoid Them

Anvil shafts are one of the strongest pieces of metal on your machine but they do have some slight malleability. Depending on the length of the anvil, the amount of air pressure the blades are set to, blade diameters, number of blades you are using to slit, and your slit widths, the anvil shaft can actually bend. This is mainly a concern for score blade slitting. If there are a lot of score blades positioned to cut, once they are activated, the amount of pressure across the anvil shaft can bend the shaft in the middle making the blades in the middle reach farther to the material and sometimes come up short. One way to avoid this to to start slitting with new blades that are all the same diameter. If you start out with blades that are all the same diameter, you can rule out that there are any differences in the blades. Secondly, try adding a little more air pressure to the blades if there is room to do so indicated by your blade pressure gauge. Lastly, you may have to cut the roll in half first and run 2 rolls instead of one. If you have to attempt this method, make sure to deactivate the blades that you aren&#;t using to alleviate some of the pressure on the shaft. If these solutions don&#;t work, your project may require an anvil shaft that is larger in diameter.

Eastsign are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

A Slitting Machine Operator is responsible for the safe and efficient operation of slitting machines, which are used to cut paper, plastic, or other materials into narrower widths.

1. Operating Slitting Machine

The Slitting Machine Operator must be able to set up and operate the slitting machine according to specifications.

Want more information on Slitting Machine Manufacturer? Feel free to contact us.

• Loading and unloading materials
• Adjusting machine settings
• Monitoring the slitting process

2. Inspecting Products

The Slitting Machine Operator must be able to inspect the finished products to ensure that they meet quality standards.

• Checking for defects
• Measuring dimensions
• Making adjustments as needed

3. Maintaining Equipment

The Slitting Machine Operator must be able to maintain the slitting machine and other equipment in good working condition.

• Cleaning and lubricating the machine
• Replacing worn parts
• Troubleshooting minor problems

4. Safety

The Slitting Machine Operator must be able to follow all safety procedures and wear appropriate protective gear.

For more information, please visit Flatbed Heat Press Machine.

• Keeping the work area clean and organized
• Reporting any hazards or unsafe conditions
• Using proper lifting techniques