Air-cooled Condensing Units

When installing walk-in coolers and freezers, the installing contractor will need to select the proper location of the condensing unit. Location is an important consideration for the overall success of the installation. There are several items to consider when selecting the location.

If you are looking for more details, kindly visit Kendall.

First, the location should be discussed with the customer. Be sure the customer is in agreement with the placement of the condensing unit. The customer may have a plan for the location different from where the installing contractor decides to place the unit. As retail space becomes more expensive, customers will want to take advantage of all their indoor space and may want the condensing unit located outdoors or in an indoor location that will not interfere with their operation.

If the condensing unit is to be placed indoors, make sure the location has adequate ventilation. Low-temperature condensing units will require approximately 200 cubic feet per minute (cfm) per 1,000 Btu, and medium-temperature units will require approximately 165 cfm per 1,000 Btu. Always check with the condensing unit manufacturer for ventilation requirements, as they may differ from these approximate values. Another consideration with air-cooled units located indoors is the heat they may add to the space. This additional heat may be objectionable to the equipment owner.

OUTDOOR CONSIDERATIONS

An alternative to locating the condensing unit indoors is to place it outdoors. When installed outdoors there are several components that should be added with the condensing unit. Some of these components may be ordered as installed options.

The condensing unit should have a crankcase heater installed. This will help to prevent refrigerant migration during the off-cycle when the condensing unit is exposed to temperatures that are colder than the evaporator. The condensing unit will also need some means of keeping the high side pressure above a minimum value during low outdoor temperatures. This is normally accomplished with either a fan-cycling control or a head-pressure controller.

The method of controlling the case temperature may also need to be modified. The system should use a pumpdown method to control the operation of the condensing unit. A standard air-sensing temperature controller should be used to control the operation of a liquid line solenoid. When the temperature controller is satisfied, it will close the liquid line solenoid, causing the refrigerant to be trapped in the condenser and receiver.

This will cause the low-side pressure to drop. The system's low-pressure control will then shut down the condensing unit as the low side pressure drops to an appropriate value. A defrost timer will also need to be added to the control system to ensure that the evaporator defrosts properly.

The outdoor unit should be covered to protect it from the outdoor environment. If the condensing unit is ordered for an outdoor application, it will normally come with some type of enclosure. When moving an indoor condensing unit to the outdoors, make sure an adequate enclosure is constructed to properly protect the unit.

One last consideration when installing either an indoor or outdoor condensing unit is to make sure the system can be easily serviced. Too often, service technicians encounter systems in which the condensing unit is located in an area where it is extremely difficult to access. Also, make sure there is an electrical disconnect available to shut off the electrical supply when needed.

Publication date: 09/04/

Customized Air Cooled Condensing Unit

The customized service of Miracle air-cooled condensing unit is the embodiment of the factory&#;s strength.

Our customized package is super flexible for your replacement, renovation, and new construction requirements.

The customization of the refrigeration condensing unit not only puts a test on the technicians but also puts forward higher requirements on the production equipment and production pipelines.

Only companies that have been in operation for many years can meet the needs of individual customization of air-cooled refrigeration units.

The Miracle air-cooled condensing unit factory adopts several welfare systems to ensure the income level of the first-line skilled workers, and at the same time improve the working environment of the workers.

So that the brain drain rate of the front-line workers is greatly reduced, thus ensuring the stability and customization of the air-cooled condensing unit. Contact us now!

Various types of air-cooled condensing units and condensing units can be customized according to your needs.

Just send us your inquiry and get a professional drawing and air-cooled condensing unit now!

Compressor Type of Air-cooled Condenser Unit?

Miracle manufactures and supplies a wide range of air-cooled condensers with world-class leading compressor brands which can be used in many different fields.

Our air-cooled condensers unit can be matched with the world&#;s leading compressors, such as Danfoss, Copeland, Bitzer, Frascold, etc.

Of course, we can also provide you with original brand compressors, such as semi-hermetic compressors, scroll compressors, rotary compressors, and other types.

Miracle outdoor air-cooled condensing units are perfectly suited for small refrigeration units in the commercial or domestic sector and offer you more flexible options.

For the freezer, refrigerator, mini or small refrigeration equipment, Miracle also can supply you with small cooling units.

Such as Maneurop compressor, mini rotary compressor, Secop compressor, etc.

For your large plant or air conditioning system, Copeland compressor condensing unit, Bitzer compressor condensing unit, and VRF air-cooled condensing unit is the best outdoor condenser.

All of them are very easy to install Because Miracle uses its developed pipe press tool, pipe press-fitting.

So the installation process is super quick and easy, and the maintenance and repairing are also straightforward.

Air-cooled Condensing Unit Parts

Miracle ensures the long-time life service and a successful operation output of every single air-cooled condenser part for your project.

They all are well tested, secured, and very trusted to use in different types of equipment.

Every air-cooled condenser unit part comes with several tests and checks through its manufacturing procedure.

We strictly handle the quality, and that&#;s why it&#;s risk-free to use.

These accessories include AC axial fans, filter drier, compressor, solenoid valve, sight glasses, liquid receiver, suction accumulator, oil separator, expansion valve, vibration eliminator, air curtain, condensate pump, refrigeration valve.

You can let us know the specific requirement of your project, and the miracle team will offer you the best matching package according to your operation.

What Refrigerant Does Miracle Use?

Miracle manufacture a large number of outdoor air-cooled condensing unit.

So there are more options for using different refrigerants.

Such as R22, R134A, R404A, R407C, R410A, R507A, etc.

You can find air-cooled refrigeration unit refrigerants matching your demand.

Air-Cooled Condensing Unit One-stop Shopping?

Along with the air-cooled condenser we mentioned before, there are a few more.

They are available for sale for all high, medium, and low-temperature uses. Some of them are:

&#; TECUMSEH compressor condenser units &#; Bitzer compressor air-cooled condensing units &#; Bitzer compressor water-cooled condenser units &#; Copeland semi-hermetic compressor condensing unit &#; Maneurop compressor condensing unit.

Miracle is a reliable supplier of air conditioning and refrigeration solutions in China.

Not only that, but we also offer you more refrigeration products.

Some of them are

&#; lokring tools and lokring fittings for solder-free connection technology

&#; outdoor condensing unit for central air-conditioning

&#; The air-cooled condenser

&#; Refrigeration evaporator

&#; HVAC parts

&#; Insulated copper pipe

These all are brilliant solutions for the successful result of your HVAC&R solution.

Please send us your project inquiry right now to know the most suitable one.

What Is The Meaning Of An Air-Cooled Condensing Unit?

An air-cooled condensing unit, air-cooled condenser, or ACC is a condenser that uses air to remove refrigerant heat on the tube.

It is a direct dry cooling system. It has a plentiful coil area with air blowing axial fan.

It also has adjusted copper pipe, ware, and plate type fin to increase the surface area for heat transfer.

Where Can I Use An Air-Cooled Condensing Unit?

An air-condensing unit has a broad application of use area.

You can use it in the residential or small office air-condensing or refrigerator condensing unit.

It is very suitable for refrigeration systems, hvac systems.

The other best use area of the air-cooled condensing unit is in a power plant where water has scarcity.

Such as thermal power plants, combined cycle, biomass, and waste to energy, coal, or concentrated solar power plant.

In addition, air-cooled condensing unit for cold room, walk-in cooler, etc.

What Air-Cooled Condensing Unit Does Miracle Manufacturer?

Miracle Refrigeration is a global leader in manufacturing air-cooled condensers, evaporator coil, and refrigeration coil around the World.

We offer central air-conditioning solutions and refrigeration solutions which fall under many unique and innovative patents.

A miracle air-cooled condensing unit is one of the best solutions for your central air-conditioning operation and walk-in cooler.

Miracle Refrigeration and Equipment Co, Ltd manufacturer and supplies all types of air-cooled condensing units.

Some standard air-cooled condensers among them are

• The outdoor air-cooled condensing unit,
• Danfoss type air-cooled condensing unit,
• The small air-cooled condensing unit,
• Copeland type air-cooled condensing unit,
• Bitzer type air-cooled condensing unit,
• VRF air-cooled condensing unit.

Benefits Of Using an Air-Cooled Condensing Unit?

Miracle refrigeration and equipment co, ltd manufacture and supply the reliable latest model air-cooled condensing unit for your successful project installation.

We maintain the highest rules and regulations of the international quality standard maintenance organizations.

Having a strict policy on not compromising quality, Miracle can supply the maximum sustainable air-cooled condensing unit to our customers.

Our air-cooled condensing unit prevents the unnecessary use of water and saves money by not wasting water.

Its higher efficiency enables it to unvarying steam allocation, Which ensures the prevention of unusually freezing, flooding, sub-cooling, and air accumulation.

So the overall performance of Miracle manufactured air-cooled condensing unit is undoubtedly higher than others in the market.

Can I Place My Air-cooled Condenser On The Roof?

The best practice is to place your air-cooled condensing unit on the ground because of the convenience of maintenance and repair.

But if you need to run a long line to place the outdoor unit on the ground, It&#;s okay to place it on the roof.

Miracle air-cooled condensing unit is super flexible to fit on the ground or roof. It has low roof-load weight distribution.

Miracle manufactured condenser is very straightforward to install on both ground and rooftop.

Why Should I Use An Air-Cooled Condensing Unit?

Air-cooled condensing and water-cooled condensing units have their advantages and disadvantages from their aspect use area and operation.

But air-cooled condenser is the best alternative for you to use if you need it for high-power capacity power plants such as geothermal power plants.

As an air-cooled condensing unit make the heated cooled by ambient air, it doesn&#;t require water to cool.

So all of the project. Plant and operation where water is scared, the air-cooled condensing unit is pretty popular to reject the heat.

Almost in every desert area&#;s use, an air-cooled condenser plays a beneficial and problem-solving role.

So whether it&#;s a desert or the cooling water is inadequate or insufficient, restricted or expensive, an air-cooled condensing unit is the best alternative to use.

Learn more about it from our experienced engineer. Please send any inquiries right now.

What Are The Advantages Of a Miracle Air-Cooled Condensing Unit?

We use computer simulation to build the unit model and adopt modular design.

Not only that but the Miracle air-cooled refrigeration unit is condensed with our extensive installation experience.

So it fits your needs better.

Some advantages of Miracle air-cooled condensing unit are:

&#; The air-cooled condenser is relatively small in size,

If you are looking for more details, kindly visit air cooled condensing units exporter.

&#; The installation process and cost is less than others,

&#; It also doesn&#;t require the cooling tower vapor plume,

&#; Installation with the fireless connection technology,

&#; It doesn&#;t require cooling water makeup, cooling water pumps and pumping,

&#; It is very flexible to use in any project because of its innovative and economically friendly design,

&#; Maintenance procedures and costs are deficient.

How Does Air-Cooled Condensing Unit Work?

The air-cooled condensing unit function is to cool the heat from two places.

One is absorbed heat by the evaporator and released by the refrigerant, and the other is the heat generated by the compressor.

The air takes away this heat though there is natural convection which also cools the refrigerant.

Miracle manufacture the top quality ensured air-cooled refrigeration unit, which can be used in any area or project where water is inconvenient.

Does Air-Cooled Condensing Unit Have High-Duty Working Strength?

There is no doubt about the quality and working output of a miracle air-cooled condenser unit.

You will be satisfied with the particular numeric value of the capacity of a miracle air-cooled steam condenser.

Miracle air-cooled condensing unit has high efficiency but a low leakage rate.

The axial fan significantly reduces heat load and increases the working strength of our condensing unit.

It has a fantastic quality of saving energy.

You can use it in every possible way and get the maximum use of a miracle manufactured air-cooled condensing unit.

Why The Use Of Air-Cooled Condensing Units Increased?

For the last decade, recyclable power was prevalent and widely used in all sectors as a great alternative to water, coal, oil, or natural gas.

But these are not unlimited resources throughout the World.

Again the water levels are falling gradually, and there are other essential uses of water to live life.

So the best alternative to it can be the air-cooled condensing unit.

Miracle Refrigeration Equipment Co, Ltd has especially worked with Direct Dry Cooling System, Indirect Dry Cooling System, and Hybrid Cooling System.

As a dedicated and devoted company in the central cooling and refrigeration field.

Miracle continuously explores new and innovative technology to improve the cooling system for economic development.

One of the surveys conducted by us says that the capacity of a large power plant using an air-cooled condensing unit increased by a significant number more than five times in the last two decades.

Does A Good Condenser Coil Necessary In An Air-Cooled Condenser?

Like an evaporator coil, a condenser coil is also an essential part of an air-cooled condenser unit.

The fan blows the air through it to cool the heat generated in the refrigerant.

Miracle Refrigerator and Equipment Co, Ltd manufacture and supply a large selection of cooling AC condenser coil, heating coil, and another flat, L, U, or G-shaped condenser coil.

You also can get a customized condenser coil with your project specification.

To get high efficiency from your air-cooled condensing unit.

Miracle&#;s designers and engineers can improve your customized condenser coil for you.

No matter you need copper, gold aluminum, or others fin material for it.

As the leader of the air-cooled condenser manufacturer in China, Miracle work professionally to fulfill your demand.

So we highly optimize your parts design by our experienced engineers and team member.

It can reduce the leakage rate of your machine.

The Miracle can be the best condenser coil, overall air-cooled condensing unit provider, with other advantages and issue solving quality.

Read more: what are internal thread copper tubes, the trend of internal thread copper pipe.

Does All Miracle Manufacture Air-Cooled Condenser Parts Anti-Corrosion?

Miracle manufacture and supply a high anti-corrosion air-cooled condenser which has a long service life.

We manufacture every single part of the air-cooled condenser with ISO: requirement and verified by all world prominent quality inspection authorities.

The out shell is by the galvanized sheet, and there is special spraying in the inner and outer walls of every possible part of an air-cooled condensing unit.

So every single anti-corrosion part we supply is much higher and very effective than any others.

There are more processes that miracles go through to manufacture a complete anti-corrosion compressor, condenser, and other parts.

All the copper pipes of the condenser coil or others are sprayed in a high-temperature environment with materials proven to work against corrosion.

Miracle also ensures the safety of the evaporator, condenser, and another crucial part of an air-cooled condensing unit.

There are copper fins, or hydrophilic aluminum foil aluminum fins are used to make evaporator and condenser anti-corrosive.

So there is no doubt of getting high work efficiency and long life service from the Miracle manufactured air-cooled condensing unit.

What Are The Types Of Air-Cooled Condensing Units?

There are two types of air-cooled condensing units based on the process of blowing air.

They are natural convection air-cooled condensers and forced convection air-cooled condensers.

In the natural convection air-cooled condenser, the cold air absorbs heat from the hot condenser by going through it and making it cooler.

This air-cooled condenser diagram cycle is done by natural convection, requiring an extra fan to flow the air.

That&#;s why the process of a natural convection air-cooled condenser is much slower, which can be used in residential use of refrigeration and air conditioner but not in a large plant, commercial or industrial use.

Forced convection air-cooled condensing units use fans to replace the heat of the compressor and coil by forcing the cold air into it.

A high-power motor and a strong fan are essential to get the highest efficiency in this air-cooled condensing unit system.

Miracle manufactures a high-static and low sound motor that brings the high-duty fan in service to replace the hot air quickly.

It is much better than others because of the power-saving capability and minimum noise.

So it can quickly raise the capacity of your air-cooled condensing unit to use in individual, commercial, industrial, or extensive power plants.

Why Choose Miracle Air-Cooled Condenser Unit For Your Refrigeration System?

Miracle Refrigeration Equipment Co. Ltd. is China&#;s largest producer, manufacturers, and supplier of significant refrigeration and air conditioning equipment.

It is also the World&#;s no one brand of an air-cooled condensing unit and other outdoor condensing units.

Miracle has more than 20 innovative own registered patents on refrigeration and air-conditioning solution, which are the successful results of our research, development, and design of economical, cost-effective, and work efficient equipment.

Our air-cooled condensing unit is widely used in different regions globally.

Such as Europe, North America, South America, the Middle East, Africa, and South Asia.

Miracle Refrigeration Equipment Co. Ltd. is the name of quality, safety, and lifelong service.

Our mission is to create surprisingly friendly and best economic friendly air-conditioning, refrigeration, and freezing solutions for everyone.

All Miracle manufactured air-cooled condensing unit performance is certified and verified following ISO and other international inspection authorities.

Furthermore, Miracle Refrigeration Equipment Co. Ltd has a pretty strong capability to design and manufacture any custom specified condensing unit for your projects.

We want to use our 18 years of successful experience of continuous development in manufacturing and exporting outdoor and indoor air-cooled condenser units.

Our dedicated support team is waiting for your inquiry to assist you.

Where Do Air-Cooled Condensing Units Go?

An air-cooled condensing unit, also called an outdoor air-cooled condenser, can be located outside the room.

You should place an air-cooled condensing unit where it can breathe well.

The tight space can affect the efficient operation of your air-cooled condensing unit.

Your air-condition and refrigeration project success rate depends on the installation location of the outdoor condensing unit.

So it&#;s essential to choose the right location for your air-cooled condensing unit.

First of all, you should discuss the location of the air-cooled condensing unit with your contractor.

It would be best if you let your contractor know your preplanned location.

Secondly, make sure there is enough space for ventilation so your air-cooled condensing unit.

The low-temperature air-cooled condensing unit and the high-temperature air-cooled condensing unit may require different portions of a large or small place.

Check your ventilation requirements and follow them to know the different values.

Which Brand Air-Cooled Condenser Is The Best Option To Buy?

Why won&#;t you be successful when you are using a robust and high-strength air-cooled condensing unit manufactured by Miracle?

Our revolutionary refrigeration and air-conditioning solution can help your business to succeed.

Miracle air-cooled condensing unit is integrated with easy installation service and comes with weatherproof construction.

The direct-drive condenser fans ensure a high lifetime and excellent cooling option.

Miracle also guarantees for unique e-coated condenser coil with an unseparated subcooling circuit.

The high-static and low sound cooling motor fan will never bother you and don&#;t make noise.

It is minimum sound compared with other air-cooled condensing units.

The outdoor cabinet has both horizontal airflow and vertical airflow configuration design.

To say in one word, all of the single parts of Miracle&#;s air-cooled condensing unit are tested, well protected, and risk-free.

Each of them has a long lifetime and is super efficient on performance.

Please ask us any questions about the quality, working efficiency of our air-cooled condenser, or its single parts.

Miracle supply high-quality air-cooled condenser in refrigeration solutions that have top-quality single-row condenser fin tubes.

So Miracle can offer you a great freezing and corrosion resistance air-cooled condenser.

It has an excellent manual or semi-automatic cleaning system.

Overall usability is higher than others because of its flexibility in using different plants and plots.

What Is A Condensing Unit?

A condenser or an outdoor condensing unit is a heat exchanger that changes or causes a gas or vapor to a liquid under its cooling process.

It expet the heat the evaporator absorbed and kept cool our space.

It is the most efficient heat released application in the worldwide commercial, industrial and residential spheres.

Are you interested in learning more about air cooled condensing units manufacturer? Contact us today to secure an expert consultation!