Mining Lights and Hats Carbide Lamps

Franklin Baldwin Patent Drawing

Check now

Carbide lamps are powered by the reaction of calcium carbide (CaC2) with water (H2O). This reaction produces acetylene gas (C2H2) which burns a clean, white flame. Acetylene gas was originally discovered by Edmund Davy in , but commercial production of calcium carbide only became feasible due to the efforts of Thomas Wilson in . Frederick Baldwin is credited with developing the first carbide mining lamp, holding U.S. Patent number 656,874 for an Acetylene Gas Lamp that was granted August 28, . Commercial production of carbide mining lamps began soon after, and the collection in the Division of Work and Industry reflects a variety of carbide lamp designers and manufacturers including Baldwin, Auto-Lite, Guy&#;s Dropper, Shanklin, Dewar, and Wolf. Carbide lamps came in different sizes for different uses, smaller lamps were cap lamps, larger lamps were hand lamps or hanging lamps.

The general design of carbide lamps was consistent across designers and manufacturers, with the differences often being improvements to the water-drip mechanism or gas feed. The similarity of lamps was an issue for Frederick Baldwin, who sued many of his competitors for patent infringement. The design of the carbide lamp consists of two chambers&#;an upper chamber holding water and a lower chamber holding the calcium carbide. Acetylene gas is produced when water from the lamp's upper level encounters the calcium carbide stored in the base via a dripping mechanism. The amount of water flowing into the calcium carbide container can be controlled, with more water producing more gas and a bigger flame when the lamp is lit. The gas is funneled to the burner, where it is lit by a match or a built-in striker. Once the flame is lit, a reflector allows the miner to control the direction of the light.

Wanding are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Miner's wearing carbide lamps one mile into shaft, King Harlan Mine, Kentucky, May 5th, .

The carbide lamp consisted of several improvements to both the oil-wick lamp and candle as a means for lighting in non-gaseous mines. The lamp produced no carbon monoxide, consumed less oxygen, gave a brighter 4-6 candlepower light, and had a higher light quality than the candles or oil-wick lamps it replaced. The carbide lamp had its problems as well. Average runtime in carbide cap lamps was only about four hours, necessitating a carbide refill mid-shift, which could leave the miner in darkness. The burner tip was also prone to clogging, and concussive blasts or winds inside the mine could extinguish the light as well.

The popularity of carbide mining lamps was short&#;lived, as electric battery powered lamps came into favor around due to their superior light, safety, and runtime, and had almost completely replaced carbide lamps by the s.

If you are looking for more details, kindly visit calcium carbide granules.