5 Things to Consider When Purchasing Scissor Lift Tables

5 Things to Consider When Purchasing Scissor Lift Tables

Do you have a business that involves a lot of loading, unloading, and various production tasks?

Read more

If so, it&#;s time to consider investing in scissor lift tables. A scissor lift table is a mechanical device that is used to bring the load to a more ergonomic position, therefore increasing both the safety and the efficiency of your workday. These tables reduce the need for constant and repetitive bending, reaching, and lifting that can all be very taxing on the body.

A scissor lift will help relieve your workers from back-breaking work and also ensure that your goods don&#;t get damaged. But, picking out the right scissor lift table for your business isn&#;t always easy. There are an overwhelming amount of choices, and choosing a table that will best suit the needs of your business can be a daunting task.

In this article, we&#;ll go over the top five things you need to consider when purchasing scissor lift tables.

1. Intended Use

Above all else, a scissor lift table should be selected based on its intended use. The use will help determine the capacity of the lift, the style, and any extra features that might be needed.

Before you start shopping, it&#;s important to examine and analyze your needs so you can figure out the exact intended use for it. Make a list of your needs and the results you expect from the lift, and then use this to guide you for other considerations.

2. Mobility

Decide whether you are going to use the scissor lift table in a fixed location or if it needs to be mobile. Things to keep in mind include:

For more information, please visit Wonder Machinery.

• Assembly and production lines would require one that can be set in a fixed location, whereas construction and maintenance work would require one that is mobile.
• If you need it to be mobile, you&#;ll want to look into lift tables that can be powered by battery or gas, as some spots may not have electricity available.

3. Load

Another factor you need to take into consideration is the workload you need the lift to hold. Typically, a lift with more capacity is going to be more expensive. Therefore, if you have large loads that need to be moved, budget options may not be available to you.

4. Safety Features

Safety is perhaps the most important consideration when buying a scissor lift table. The safety of you and your employees should always be of utmost priority.

When shopping for a lift, safety features such as lanyards, emergency buttons, and safety bars should all be taken into consideration. These safety features and others can help decrease accidents, which will increase efficiency and save your business time and money.

5. Height

There are two aspects in regards to height that need to be considered when buying a lift:

• First, you need to consider the maximum height of the loads you need to transport. Lifts can be used to move loads to a portion of this height without any issue.
• You also need to consider the height of the lift when it&#;s collapsed, as it may need to be able to fit through a doorway or some other shorter structure.

Contact Us for More Information on Our Scissor Lift Tables

By taking these factors into consideration, you should have a good start on finding a scissor lift table to suit your business&#; needs and make your workplace more efficient. If you have any questions about selecting the right lift table, please do not hesitate to drop us a comment below or contact us today. 

It&#;s a # rated lift by Discount ramps, similar to the Harbor Freight ones that we all know. Seems a little heavier material but not much.

I have the same questions about front wheel removal with the chock. I&#;ve used those for years and know exactly how difficult it can be to get out of one.

Two parts of the problem are getting INTO the clamp and off the bike without dropping it and getting OUT of the chock, also without dropping it. With the clamp the problem is getting off and holding it up while clamping. Easier with the chock.

I&#;m thinking about side extensions that are secured to the lift and can&#;t kick out, so I can ride on and use the sidestand long enough to strap it, then strap and slowly clamp the front wheel.

Videos I&#;ve watched show use of the removable panel for the rear.

To remove the front, place the rear drop panel into place, strap the bike upright left/right, loosen/unclamp the now secured front wheel (on the now down strapped) bike, lift /rock onto the back wheel and off the front tire. Now you can remove the front wheel. Both wheels at once? No idea yet.

I guess you can do that (rock it onto the rear wheel) with the chock. I&#;ve done it on the floor lots of times. Don&#;t know. I&#;m hoping to hear from someone here who actually does this. Maybe a jack to rock it back. I&#;ve done that with a C-10 on the floor. Doesn&#;t take much lift. I need to go look.

I may wind up drafting one of my sons to help.