How to Choose spine instruments catalog?
Instruments for Spinal Neurosurgery
Special curettes for microdiscectomy
If you want to learn more, please visit our website Lingchuang Yihui.
- Bayonet-shaped with slender shaft for good visibility under the microscope.
- Ergonomically designed handle.
Product program
- Choice of 50 curettes
- 6 different angles and widths
- 3 different lenghts cervical, cervical long and lumbar curettes
Choose from our large selection of wound retractors and laminectomy retractors, nerve hooks, nerve root hooks and exploration hooks. We can offer wound retractors and laminectomy wound retractors in a wide range of variants.
- Classic ANDERSON-ADSON wound retractors with lock and sharp blade tips to special retractors
- CASPAR retractor set with various blades
- Fine wound retractors for narrow approaches e.g. FINSEN or LOGAN
We can also offer the full range of traditional instruments, from which you can select according to the surgical requirements for individual operations.
- Osteotomy forceps
- Osteotomes
- Flat and hollow chisels
- Raspatories
- Pestles and mallets
- Sharp spoons and curettes
spine instruments
SPINE
INSTRUMENTS
Click thumbnail image for details
Ball Spike with Bell Handle
Bernard Spinal Alignment Block
Bradley Periosteal Elevator
Cobb Elevators
Extra Small Joint, Calcaneal and Small Bone Distractor
Gelbke Cobb Elevator with Suction
Gupta Disc Space Spreaders
Gupta Extended Osteotome
NEW!
Gupta Probe Set
Hannum Graspers
NEW!
Harvey Lumbar Bone Graft Sled Assembly
Intraarticular Tissue Grasper/Rongeurs
Joint, Calcaneal, Small Bone Compressors
Joint, Calcaneal, Small Bone Compressor/Distractor
Joint, Calcaneal and Small Bone Compressor/Distractors with Speed Lock
Joint, Calcaneal and Small Bone Distractors
Kerrison Punch with Small Grip Handle
Lawton Broken Screw Extractor
Lawton Screw Extractors
Long Bonney Tissue Forceps
Macko Square Tipped Rongeur
Micro Curettes
Mini-lexer Osteotomes
Mobasser Bayonet Forcep
Ortho Self-Retaining Retractors
OrthoLucent&#; Mini Hohmann Retractors
Orthopedic Needle Holder/Scissors
Periosteal Elevators
Pituitary Rongeur with Teeth
Ring Curettes
Rogozinski Lamina Spreader
Rogozinski Locking Needle Driver/Scissors
Rogozinski Offset Ring Curette
Rogozinski Reverse Angle Retractor
Rogozinski Rotating Rongeur
Rogozinski Soft Tissue Retractor
Romanelli Deep Gelpi Retractor
Screw/Pin Removal Locking Pliers
Shark Tooth Graspers
Spine/Trauma Deep Tissue Retractor
Star Bit Driver Set
Subscapularis Spreader
Taylor Retractors
Tissue Graspers with Shark Teeth
Universal Bone Grafting/Impacting Forceps
Universal Screw Removal Instrument System
Universal Screwdriver Set
Ball Spike with Bell Handle
Product No:
Overall Length: 12" (30,6 cm)
Bernard Spinal Alignment Block
Designed to act as a right angle &#;set square&#;, using stock sterile rods, to help assess intraoperative mechanical axis of the spine
Designed by Jason Bernard, MB, MD, FRCS
Holes of 5.5mm, 6.0mm, and 6.35mm are drilled at right angles through the block on the 1cm high faces. Two sterile stock rods can be inserted into the holes to create the "set square".
Product No:
Dimensions: 5 cm x 5 cm x 1 cm
Rod Holes: 5.5 mm, 6.0 mm & 6.35 mm
Bradley Periosteal Elevator
Designed by Gary W. Bradley, MD
Product No's:
[1/2"]
Overall Length: 11" (27,9 cm)
Blade Width: .5" (13 mm)
[3/4"]
Overall Length: 11" (27,9 cm)
Blade Width: .75" (19 mm)
Cobb Elevators
Ultra hard titanium nitride coating helps to extend blade life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No's:
With Teeth:
[1/2" with Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1/2" (13 mm)
Overall Length: 11" (27,9 cm)
Blade Width: 1" (25,4 mm)
Without Teeth:
[1/2" without Teeth]
Overall Length: 11" (27,9 cm)
Blade Width: 1/2" (13 mm)
Overall Length: 11" (27,9 cm)
Blade Width: 1" (25,4 mm)
Extra Small Joint, Calcaneal and Small Bone Distractor
Two hole sizes allow for easier pin size selection and helps with distraction in fracture and osteotomy procedures
1/16" (1.6 mm) & 3/32" (2.4 mm)
Pin Hole Diameters
Product No: -XSD [Extra Small Distractor]
Overall Length: 4.25" (10,8 cm)
Gelbke Cobb Elevator with Suction
Designed to be used during exposure of the posterior spine, as well as for pelvic and acetabular trauma cases
Designed by Martin K. Gelbke, MD
Ultra hard titanium nitride coating helps to extend life by increasing surface hardness, prolonging sharpness, and resisting chemicals and corrosion.
Product No:
Overall Length: 12.75" (32,4 cm)
Cobb End Width: 18 mm (.7")
Shaft plus Head Length: 5.5" (15 cm)
Gupta Disc Space Spreaders with Easy Release Locking Mechanism
Designed to distract open collapsed disc spaces
Designed by Munish C. Gupta, MD
Locking ratchet mechanism helps prevent accidental release, and provides for controlled adjustment and easy release.
Product No&#;s:
[Small Straight]
Overall Length: 8.5" (21,6 cm)
Blade Width: 10 mm
Blade Thickness - Closed: 3 mm
Opens to: 22 mm
[Large Straight]
Overall Length: 11.5" (29,2 cm)
Blade Width: 13 mm
Blade Thickness - Closed: 4 mm
Opens to: 25 mm
Overall Length: 9.25" (23,5 cm)
Blade Width: 10 mm
Blade Thickness - Closed: 3 mm
Opens to 22 mm
Overall Length: 12.5" (31,8 cm)
Blade Width: 13 mm
Blade Thickness - Closed: 4 mm
Opens to: 25 mm
Gupta Extended Osteotome
Designed to help cut bone and cartilage in procedures such as facetectomies and vertebrectomies
Designed by Munish C. Gupta, MD
Product No:
Overall Length: 11" (27,9 cm)
Blade Width: .5" (13 mm)
Gupta Probe Set
A universal spine probe set designed to help cannulate pedicles, with various sized and shaped tips for use in cervical, thoracic, lumbar, and sacral pedicles
Designed by Munish C. Gupta, MD
Product No&#;s:
Set Includes / Available Individually:
-01 [Spine Probe, Straight]
Overall Length: 9.43" (24 cm)
Handle Length: 5" (12,7 cm)
Probe Shaft Diameter Tapers Down To: 1 mm
Probe Ball End Diameter: 1.5 mm
Depth Markings at: 2, 3, 4, and 5 cm
-02 [Spine Probe, Bent]
Overall Length: 9.1" (23,1 cm)
Handle Length: 5" (12,7 cm)
Probe Shaft Diameter Tapers Down To: 1.5 mm
Probe Ball End Diameter: 2.8 mm
Depth Markings at: 2, 3, 4, and 5 cm
-03 [T-Handle Spine Probe, Flat Tip]
Overall Length: 10.25" (26 cm)
T-Handle Width: 2.75" (7 cm)
Handle Length: 5" (12,7 cm)
Probe Shaft Diameter: 3.6 mm
Flat Tip Length: 20 mm
Flat Tip Width: 1.2 mm
Depth Markings at: 2, 3, 4, 5, and 6 cm
-04 [Pointed Thoracic Pedicle Probe]
Overall Length: 9.43" (24 cm)
Ball Handle End Diameter: 1.5" (3,8 cm)
Handle Length (including ball end): 6.4" (16,3 cm)
Before Tip, Probe Shaft Diameter Tapers Down To: 3 mm
Depth Markings at: 1, 2, 3, 4, and 5 cm
-05 [Rounded Lumbar Pedicle Probe]
Overall Length: 9.09" (23 cm)
Ball Handle End Diameter: 1.5" (3,8 cm)
Handle Length (including ball end): 6" (15,3 cm)
Probe Shaft Diameter Tapers Down To: 4 mm
Depth Markings at: 3, 4, 5, and 6 cm
-06 [Pediatric Pedicle Probe]
Overall Length: 8.45" (21,5 cm)
Ball Handle End Diameter: 1.5" (3,8 cm)
Handle Length (including ball end): 5" (12,7 cm)
Before Tip, Probe Shaft Diameter
Step Tapers From: 5 to 2 mm
Depth Markings at: 1, 2, 3, 4, 5, and 6 cm
Hannum Graspers
Teeth in jaw firmly holds bone and tissue
Designed by Scott Hannum, MD
Non-locking design can be easily gripped while allowing greater pressure to be applied.
Used for dissection(to preserve)/or removal of the anterior capsule, removal of the labrum, or other soft tissue around the acetabulum prior to cup implantation. Also used to release the capsule to expose the femur for placement of the femoral stem. Long, low profile helps facilitate working through a small incision without disrupting vision.
Available in three jaw sizes: short jaw for holding bone, medium jaw for smaller bones, and long jaw for tissue.
Product No's:
-01 [Short Jaw]
Overall Length: 9.25" (23,5 cm)
Jaw Width:
8 mm
-02 [Medium Jaw]
Overall Length: 9.25" (23,5 cm)
Jaw Width:
5 mm
-03 [Long Jaw]
Overall Length: 9.25" (23,5 cm)
Jaw Width:
3 mm
Harvey Lumbar Bone Graft Sled Assembly
Designed to help deliver and tamp morselized bone graft to transverse processes during lumbar spinal fusion
Designed by Charles Harvey, DO
Product No&#;s:
-00 [Harvey Lumbar Bone Graft Assembly]
Set includes / Available Individually:
-01 [Harvey Lumbar Bone Graft Sled]
Overall Length: 10.625" (27 cm)
Sled Width: 1.5" (3,8 cm)
Overall Length: 11.5" (29,2 cm)
Pusher End Width: 1.3" (3,3 cm)
Intraarticular Tissue Grasper/Rongeurs
Used to securely grasp tissue or can be used to rongeur tissue
Product No&#;s:
STANDARD HANDLE
-01 [5" Standard]
Overall Length: 8" (20,3 cm)
Shaft Length: 5" (12,7 cm)
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
-02 [9" Standard with Locking Ratchet Handle]
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
SMALL GRIP HANDLE
Small Grip Handle version is designed with the grip closer together for easier gripping and to help reduce hand fatigue
.
-01-SG [5" Small Grip]
Overall Length: 8" (20,3 cm)
Shaft Length: 5" (12,7 cm)
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
Joint, Calcaneal and Small Bone Compressors
Designed for compression in fracture and osteotomy procedures
Two hole sizes allow for
ease of pin size selection:
1/16" (.062") (1.6 mm) &
3/32" (.094") (2.4 mm)
Product No&#;s:
-SC [Small Compressor]
Overall Length: 6" (15,2 cm)
-XSC [Extra Small Compressor]
Overall Length: 4.25" (10,8 cm)
Joint, Calcaneal, Small Bone Compressor/Distractor
Selection lever switches the mechanism from compression to distraction
Simply squeeze the handle one time after direction selection to engage the mechanism. Two hole sizes for pin size selection. Calibrated ratchet handle.
Product No: -LS
Overall
Length: 8.5" (21,6 cm)
&#;Holes For: .062" & .094" (1.6 & 2.5 mm) K-wire Pins
VIDEO:
Joint, Calcaneal and Small Bone Compressor/Distractors with Speed Lock
Speed lock helps allow precise control and prevents unintended release
Helpful in a variety of indications.
Thumbscrews help prevent the unit from sliding on the pins.
Product No's:
Closed Arms with Speed Lock
-LS [Large]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 8" (20,3 cm)
-SS [Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 6" (15,2 cm)
-XS [Extra Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 4.5" (11,4 cm)
Outspread Arms with Speed Lock & Thumbscrews
-LB [Large]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 8" (20,3 cm)
Closed Arms with Speed Lock & Thumbscrews
-SS [Small]
Hole Diameters: For .062" & .094" (1.6 & 2.4 mm)
Overall Length: 6" (15,2 cm)
Joint, Calcaneal and Small Bone Distractors
Two hole sizes and two arm designs allow for easier pin size selection and helps with distraction in a variety of indications
Product No&#;s:
SMALL
Overall Length: 6" (15,2 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
-SB [Outspread Arms
LARGE
Overall Length: 8" (20,3 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
If you want to learn more, please visit our website spine instruments catalog.
-LS [Closed Arms]-LB [Outspread Arms]
Thumbscrews help prevent the unit from sliding on the pins
SMALL WITH THUMBSCREWS
Overall Length: 6" (15,2 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
-SB [Outspread Arms]
LARGE WITH THUMBSCREWS
Overall Length: 8" (20,3 cm)
Holes Diameters: For 1.6 mm & 2.4 mm K-wire Pins
-LB [Outspread Arms]
Kerrison Punch with Small Grip Handle
Designed with the handle closer together for easier gripping and to help reduce hand fatigue, the punch helps to remove small portions of bone and soft tissue
Product No's:
[7&#; Kerrison Punch &#; 5 mm]
Shaft Length: 7" (17,8 cm)
Punch Width: 5 mm
[9&#; Kerrison Punch &#; 5 mm]
Shaft Length: 9" (22,9 cm)
Punch Width: 5 mm
Lawton Broken Screw Extractor
Designed to help remove broken or stripped screws (1mm-2mm)
Designed by Jeffrey Lawton, MD
Product No: -04
Overall Length: 4" (10,2 cm)
Handle Width: 3" (7,6 cm)
Lawton Screw Extractors
Designed to help extract mini and micro fragment screws; small cannulated screws; or headless screws
Designed by Jeffrey Lawton, MD
Product No's:
-00 [Set of Three with Case]
Individual Product Numbers:
-01 [1.5 mm Screw Extractor]
Overall Length: 6" (15,2 cm)
Handle Width: 4" (10,2 cm)
Overall Length: 6" (15,2 cm)
Handle Width: 4" (10,2 cm)
Overall Length: 6" (15,2 cm)
Handle Width: 4" (10,2 cm)
[Sterilization Case]
Long Bonney Tissue Forceps
Extra length&#;3" (7,6 cm) more than standard&#;allows for use in deep wound areas
Product No:
Overall Length: 10" (25,4 cm)
Macko Square Tipped Rongeur
Square tipped rongeur with an ergonomic grip, double action mechanism, long reach, and low profile &#; for use in total ankle, hip, knee, and spine surgery
Designed by Victor W. Macko, MD
When used for morcelizing bone graft, the shallow, wide jaw helps avoid impaction. Ergonomic grip, double action mechanism, long reach, and low profile.
In total ankle surgery, the aggressive, low profile jaws aid in the removal of tibial bone in spite of limited space. The square ended tip helps produce a flat, finished surface following anterior talar facet reaming.
Product No's:
-01 [Small Jaw]
Jaw Bite: 5 x 18 mm
Overall Length: 10" (25,4 cm)
Jaw Bite: 7 x 18 mm
Overall Length: 10" (25,4 cm)
Micro Curettes
STRAIGHT
Overall Length:9.75" (24,8 cm)
Shaft Length: 4.5" (11,4 cm)
Straight Micro Curette &#;
Cup Size 1
Cup Size 2
Straight Micro Curette &#;
Cup Size 4/0
Straight Micro Curette &#;
Cup Size 6/0
ANGLED 45°
Overall Length: 9.75" (24,8 cm)
Shaft Length: 4.5" (11,4 cm)
-01 Angled Micro Curette &#;
Cup Size 1
-01 Angled Micro Curette &#;
Cup Size 2
-01 Angled Micro Curette &#;
Cup Size 4/0
-01 Angled Micro Curette &#;
Cup Size 6/0
Four cup sizes, straight or angled shaft.
Mini-lexer Osteotomes
Helpful in osteophyte and cement removal
Small, thin osteotomes helpful in osteophyte and cement removal in total joint surgery. Larger handle helps with better control.
Product No&#;s:
Blade Width: 4 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
-02 [6mm Wide]
Blade Width: 6 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
-03 [10mm Wide]
Blade Width: 10 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
-04 [12mm Wide]
Blade Width: 12 mm
Overall Length: 7.25" (18,4 cm)
Handle Length: 4" (10,2 cm)
Mobasser Bayonet Forcep
Designed so that the tips can hold a larger amount of bone graft, and then be used as a tamp to push it down into the disc space
Designed by Jean Pierre Mobasser, MD
Bayonetted forcep has a long reach, which is particularly helpful in less invasive spine surgery.
Product No:
Overall Length: 10" (25,4 cm)
Forcep Ends: 5 x10 mm
Ortho Self-Retaining Retractors
Calibrated ratchet is used to accurately measure the size of opening &#; useful in procedures to help assess bone graft needs
Features a no-teeth design, available with flat or serrated outside blades.
Used in knee replacement surgery to separate the femur and tibia, where the calibrated design can be used to help balance ligament.
Also useful in foot & ankle surgery.
Product No&#;s:
STANDARD HANDLE
[Small Flat with Standard Handle]
Overall Length: 6.5" (16,5 cm)
Blade Width: 7 mm
Blade Thickness: 1.68 mm
Overall Length: 6.5" (16,5 cm)
Blade Width: 7 mm
Blade Thickness: 1.68 mm
Overall Length: 9.25" (23,5 cm)
Blade Width: 10 mm
Blade Thickness: 1.68 mm
Overall Length: 9.25" (23,5 cm)
Blade Width: 10 mm
Blade Thickness: 1.68 mm
SMALL GRIP HANDLE
Small Grip Handle designed with the grip closer together for easier gripping and to help reduce hand fatigue.
-01-SG
[Small Serrated with Small Grip Handle]
Overall Length: 6.5" (16,5 cm)
Blade Width: 7 mm
Blade Thickness: 1.68 mm
OrthoLucent&#; Mini Hohmann Retractors
Radiolucent, lightweight retractors
Designed by Jeffrey Lawton, MD
The carbon fiber PEEK material is strong, lightweight, completely radiolucent, can be steam sterilized, and helps to prevent from marring component surfaces.
Product No's:
-R [8 mm Blade]
Overall Length: 6.875" (17,5 cm)
&#;Blade Width: 8 mm
Overall Length: 6.875" (17,5 cm)
Blade Width: 16 mm
Orthopedic Needle Holder/Scissors
Drive a needle and cut a suture without changing instruments
Designed to drive a needle and cut a suture without changing instruments. Longer sizes are helpful in orthopedics.
Product No's:
[4.5" (11,4 cm) with Tungsten Carbide Tips]
[5.5" (14 cm) Standard]
[5.5" (14 cm) with Tungsten Carbide Tips]
[6.5" (16,5 cm) Standard]
[6.5" (16,5 cm) with Tungsten Carbide Tips]
[7.0" (17,8 cm) Standard]
[7.0" (17,8 cm) with Tungsten Carbide Tips]
Periosteal Elevator
Designed for better control
Designed with sharper sides for ease of elevating and stripping. The handle is designed for better control.
Product No&#;s:
[Angled Shaft with Straight Blade End]
Overall Length: 7.75" (19,7 cm)
Handle Length: 4.5" (11,4 cm)
Blade Size: 19 x 14 mm
[Straight Shaft with Rounded Blade End]
Overall Length: 7.5" (19,1 cm)
Handle Length: 4.5" (11,4 cm)
Blade Size: 16 x 13 mm
Pituitary Rongeur with Teeth
Designed to optimize the efficiency of soft tissue removal and disc space preparation prior to a spinal interbody fusion
Designed by Michael Murray, MD
Unique design ensures that only the distal tip of the instrument is in contact upon closure of the jaws, allowing the grasping force to be optimized, and directed at the distal tip of the instrument. In addition, the teeth at the distal end of the instrument allow for a better grasp on tissues or disc material, for enhanced control and efficiency of removal.
Product
No:
Overall Length: 12" (30,5 cm)
Shaft Length: 8.75" (22,2 cm)
Jay Length: .75" (19 mm)
Jaw Width: .16" (4 mm)
Ring Curettes
Product No's:
[Straight, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.75" (22,2 cm)
[Straight, 6 mm]
Ring Diameter: 6 mm
Overall Length: 8.75" (22,2 cm)
Ring Diameter: 8 mm
Overall Length: 8.75" (22,2 cm)
[Bent, 3 mm]
Ring Diameter: 3 mm
Overall Length: 8.5" (21,9 cm)
Ring Diameter: 6 mm
Overall Length: 8.5" (21,9 cm)
[Bent, 8 mm]
Ring Diameter: 8 mm
Overall Length: 8.5" (21,9 cm)
Rogozinski Lamina Spreader
Self-retaining and self-leveling lamina spreader that captures the spinous processes, thereby helping to maintain interlaminar retraction
Designed by Chaim Rogozinski, MD
Product No's:
[Standard]
Overall Length: 8" (20,3 cm)
Leg Depth: 3" (7,6 cm)
Blade Width: .75" (1,9 cm)
Blade Height: .5" (1,3 cm)
-01 [Small]
Overall Length: 8" (20,3 cm)
Leg Depth: 2 (5,1 cm)
Blade Width: .75" (1,9 cm)
Blade Height: .5" (1,3 cm)
Rogozinski Locking Needle Driver/Scissors
Designed with a quick lock & release handle, can drive a needle and cut a suture without changing instruments
Designed by Chaim Rogozinski, MD
Product No's:
[Standard]
Overall Length: 6.5" (16,5 cm)
Overall Length: 7.75" (19,7 cm)
Rogozinski Offset Ring Curette
Curette is angled to allow access for easier bone preparation for anterior lumbar interbody fusion
Designed by Chaim Rogozinski, MD
and Abe Rogozinski, MD
Product No:
Overall Length: 16.25" (41,3 cm)
Handle Length: 9" (22,9 cm)
Ring Outide Dia.: 10 mm
Rogozinski Reverse Angle Retractors
Designed to be self-leveling, helping to maintain the body of the retractor on the patient for soft tissue retraction and out of the surgeons field, with finger loops designed for use with either hand
Designed by Chaim Rogozinski, MD
Designed for spine but can be used for other surgeries as well.
Product No's:
[Large]
Overall Length: 9" (22,9 cm)
Length to Bend: 8.5" (21,6 cm)
Depth: 4.25" (10,8 cm)
Overall Length: 8" (20,3 cm)
Length to Bend: 8" (20,3 cm)
Depth: 3" (7,6 cm)
Overall Length: 8" (20,3 cm)
Length to Bend: 8" (20,3 cm)
Depth: 1.75" (4,4 cm)
Rogozinski Rotating Rongeur
Designed with cutting direction adjustments of 360°, allowing the instrument to be held in an ergonomic position for enhanced control, strength and precision
Designed by Chaim Rogozinski, MD and Abe Rogozinski, MD
-
Locks every 30° of rotation: push in and turn to achieve the desired position, release to set
-
Bone fragment ejector holes along the underside and on the tip of the barrel
-
Each ronguer kit comes with one Bone Push Rod, designed to help push bone fragments out
Includes an ejector pin for easy bone fragment removal. Rotating head, with no locks or preset positions eliminates the need to switch to an up-bite or down-bite rongeur.
Product No's:
-4MM [4 mm Rongeur / Bone Push Rod Kit]
-5MM [5 mm Rongeur / Bone Push Rod Kit]
Also available individually:
-4MM-01 [4 mm/70° Rongeur]
Overall Length: 13" (45,7 cm)
Shaft Length: 7" (17,8 cm)
Jaw Bite Width: 4 mm
Overall Length: 13" (45,7 cm)
Shaft Length: 7" (17,8 cm)
Jaw Bite Width: 5 mm
Overall Length: 4.75" (12,1 cm)
Rogozinski Soft Tissue Retractor
Self-leveling retractor that helps lessen tissue movement underneath the prongs, thereby helping to maximize exposure
Designed by Chaim Rogozinski, MD
Product No's:
[Standard]
Overall Length: 8" (20,3 cm)
Leg Depth: 2.5" (6,4 cm)
Blade Width: .75" (1,9 cm)
Blade Height: 1.5" (3,8 cm)
-01 [Small]
Overall Length: 8" (20,3 cm)
Leg Depth: 2" (5,1 cm)
Blade Width: .75" (1,9 cm)
Blade Height: 1.5" (3,8 cm)
Romanelli Deep Gelpi Retractor
Offers wide, deep exposure
Designed by Ron Romanelli, MD
Can be used to hold the hip capsule out of the way for easy visualization, and to allow reaming of the acetabulum without catching the capsule in the reamer.
The ends of the retractor have dull tips to help avoid soft tissue damage.
Wider separation occurs at the deep capsule level.
Holds the muscle out of the way while retracting the capsule.
Also helpful in MIS Spine approaches.
Product No:
Overall Length: 7.45" (18,9 cm)
Depth from Bend: 5.125" (13 cm)
Prong Length: .5" (13 mm)
Screw/Pin Removal Locking Pliers
Unique jaw designed to solidly grip and clamp onto a screw head, broken screw, or pin for removal
Small
Jaw End & Bite
Designed to securely grab pins as small as 1.4 mm (.055") up to 2.4 mm (.095")
Standard
Jaw End & Bite
Designed to securely grab larger pins, screw heads, or broken screws
Small version features a smaller size jaw for smaller screws, pins and incisions.
Product No&#;s:
S [Standard]
Overall Length: 7.875"
(20 cm)
Jaw Width: 4 mm
S-01 [Small]
Overall Length: 7.875"
(20 cm)
Jaw Width: 4 mm
Shark Tooth Graspers
Graspers sharp teeth help grasp onto tissue and bone
Designed by Luis Ulloa
Helpful in removing the labrum, and osteophytes around the acetabulum and around the glenoid. Also helps to remove meniscus, osteophytes and loose bodies. Helps facilitate working through a small incision without disrupting vision.
Product No&#;s:
STANDARD HANDLE
[5" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 8" (20,3 cm)
Shaft Length: 5" (12,7 cm)
[7" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
[9" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
[12" Shaft with Standard Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 15" (38,1 cm)
Shaft Length: 12" (30,5 cm)
SMALL GRIP HANDLE
Small Grip Handle designed with the grip closer together for easier gripping and to help reduce hand fatigue.
-SG [7" Shaft with Small Grip Handle]
Jaw Size: 6 mm x 10 mm
Overall Length: 10" (25,4 cm)
Shaft Length: 7" (17,8 cm)
Jaw Size: 6 mm x 10 mm
Overall Length: 12" (30,5 cm)
Shaft Length: 9" (22,9 cm)
Spine/Trauma Deep Tissue Retractor
Designed to help maximize exposure with 90° arms and deep tissue blades
Designed by Patti Albrecht
Available in configurations of 7 or 4 teeth to help maximize exposure.
Product No's:
:
[4 Teeth]
Overall Length: 7.5" (19,1 cm)
Handle-to-Bend Length: 6" (15,2 cm)
Drop Depth: 3.25" (8,3 cm)
Prongs: 1.5" Long x .75" Wide (38 mm x 19 mm)
[7 Teeth]
Overall Length: 7.5" (19,1 cm)
Handle-to-Bend Length: 6" (15,2 cm)
Drop Depth: 3.25" (8,3 cm)
Prongs: 1.5" Long x 1.375" Wide (38 mm x 35 mm)
Star Bit Driver Set
Set consists of four star bits &#; T10, T15, T20, & T25, a handle which accommodates any of the above bits, and a sterilization case. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
The ergonomic, modular handle has two connection points, allowing for both straight and T-handle orientations.
Product No's:
-00 [4 Star Bits w/Handle & Case]
-01 [4 Star Bits w/Case only]
Also Available individually:
S [Universal 4" (10,1 cm) Handle]
-10 [T10 with A/O End]
-15 [T15 with A/O End]
-20 [T20 with A/O End]
-25 [T25 with A/O End]
[Case]
Subscapularis Spreader
Useful for deep exposure in spine surgery
Also used for retracting a split deltoid in mini rotator cuff repairs.
Product No&#;s:
T [Standard]
Overall Length: 8.375" (21,3 cm)
Overall Length: 9.25" (23,5 cm)
Taylor Retractors
Product No's:
-01 [Standard]
Overall Length: 8" (20,3 cm)
Depth from Bend: 4" (10,2 cm)
Blade Width: 32 mm
-02 [Deep]
Overall Length: 9" (23 cm)
Depth from Bend: 5.5" (14 cm)
Blade Width: 32 mm
-03 [Deep with Pin Guides]
Overall Length: 9" (23 cm)
Depth from Bend: 5.5" (14 cm)
Blade Width: 32 mm
Guide for Pins Up To: .125" (3,2 mm)
Tissue Graspers with Shark Teeth
Shark teeth help to grasp on to tissue and bone
Designed by Luis Ulloa
Ideal for removing herniated disc material.
Shaft allows for use in narrow spaces.Ideal for removing herniated disc material.
Product No's:
Shaft Length: 7" (17,8 cm)
Overall Length: 10" (25,4 cm)
Jaw: 9 mm Long x 5 mm High x 1.8 mm Wide
-02 [Straight Jaw]
Shaft Length: 7" (17,8 cm)
Overall Length: 10" (25,4 cm)
Jaw: 9 mm Long x 5 mm High x 1.8 mm Wide
-03 [Down Angled Jaw]
Shaft Length: 7" (17,8 cm)
Overall Length: 10" (25,4 cm)
Jaw: 9 mm Long x 5 mm High x 1.8 mm Wide
Universal Bone Grafting/Impacting Forceps
Bone graft can be grasped, placed and impacted without changing hands or instruments
Designed by J.A. Amis, MD
The forceps are designed with grasping ends for delivery of bone graft. When the graft is in place, the forceps are closed, which forms the ends into an impacting punch. A striking platform is attached to the end of the forceps for tapping and tamping the graft. Four end diameters are available in two lengths.
Product No&#;s:
6" (15,2 cm) Length
-01 [1/8" (3,2 mm) Diameter End]
-02 [3/16" (4,8 mm Diameter End]
-03 [1/4" (6,3 mm) Diameter End]
-04 [5/16" (8 mm) Diameter End]
10" (25,4 cm) Length
-01 [1/8" (3,2 mm) Diameter End]
-02 [3/16" (4,8 mm Diameter End]
-03 [1/4" (6,3 mm) Diameter End]
-04 [5/16" (8 mm) Diameter End]
Universal Screw Removal Instrument System
Designed to remove solid and cannulated screws, including partial, broken, stripped, and submerged screws
Product No&#;s:
S-00 [Complete System with Case]
S [Universal Instrument Handle]
S [1.5 mm Screw Extractor]
S [2.5 mm Screw Extractor]
S [3.5 mm Screw Extractor]
S [1.5 mm Hex Driver]
S [2.5 mm Hex Driver]
S [3.5 mm Hex Driver]
S [4.0 mm Hex Driver]
S [5.0 mm Hex Driver]
S [2.5 mm Cannulated Hex Driver]
S [3.5 mm Cannulated Hex Driver]
S [4.0 mm Cannulated Hex Driver]
S [5.0 mm Cannulated Hex Driver]
S [Large Cruciform Screwdriver]
S [Small Cruciform Screwdriver]
S [Mini Cruciform Screwdriver]
S [Single Slot Screwdriver]
S [2.2 mm Trephine]
S [3.2 mm Trephine]
S [4.2 mm Trephine]
S [4.7 mm Trephine]
S [7.2 mm Trephine]
S [Universal Extractor - Shaft Only]
S-01 [Large Extraction Bolt Body]
S-03 [Small Extraction Bolt Body]
S-04 [Extractor Wrench]
S [Pick]
S [Cannulated Drive Extension]
[Screw Removal Case Only]
Case Dimensions:
21" x 9.5" x 2.25 (53,4 x 24,1 x 5,7 cm)
Used for removal of stripped hex screws, buried screws, and partial screws with broken screw heads. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
Screw Extractors
Unique thread design accommodates removal of stripped screws. The instrument &#;locks&#; into the screw head and allows removal once engaged. Designed to be used in a counter-clockwise direction.
Trephines
Designed to fit over submerged screws for extraction with minimal bone loss. Extraction is enhanced by the unique tooth design. Designed to be used in a counter-clockwise direction.
Universal Extractor
Designed to remove screws with heads partially or completely missing. The cone shaped head fully engages the remaining screw and optimizes the force needed for removal. The bolt is disposable and locks into place using a unique thread design. Designed to be used in a counter-clockwise direction.
Hex Drivers
Available in all standard hex sizes. Also offered in a cannulated shaft version for easier removal of buried screws.
Screwdrivers
Standard cruciform screwdrivers in large, small, and mini, and single slot.
Cannulated Drive Extension
Used when a longer instrument shaft is desired.
Pick
Used to remove fragments and bone or tissue from screw head.
Universal Instrument Handle
The single handle allows the surgeon to decide which direction is most efficient and comfortable. The quick-connect release mechanism allows for quick interoperative exchange.
Universal Screwdriver Set
Helps eliminate the opening of multiple sterile packs when a specific size or style of screwdriver is needed
Helpful during revision total joint surgery where screws have been used, removal of bone plates, fracture fixation screws or bone graft screws. Set consists of: 7 (seven) double ended screwdriver bits &#; small & large single slot, cross & cruciate, 3.5 mm & 4.5 mm hex, small & large phillips, small, medium, & large star &#; a handle which accommodates any of the above bits, and a sterilization case.
Product No's: [Complete Set with Case]
Also available individually:
-01 [Handle]
-02 [Straight (single slot) – Lg & Sm]
Large: 7 x 1.5 mm, Small: 5 x 1 mm
-03 [Cross/Cruciate]
Large: 7 mm, Small: 6 mm
-04 [Hex]
Large: 4.5 mm, Small: 3.5 mm
-05 [Phillips]
Large: 4 mm, Small: 3.5 mm
If you are looking for more details, kindly visit endoscopy equipment name.
-08 [Small Star: #6 & #8]
-06 [Medium Star: #10 & #15]
-07 [Large Star: #20 & #25]
Comments
0